Maintenance Tips

 

Fitness Equipment Maintenance Tips

Keep all moving parts well oiled and free from debris.
Use high quality lubricants (Available from gym-repair.co.uk)
Keep all surfaces clean from sweat and residue.
Keep treadmill deck well lubricated to avoid overloading the Power Board and Motor.
Investigate any unusual noises before they become a more serious problem.
Regular service intervals are more cost effective than replacing seriously worn parts.

If you have any questions contact us service @ gym-repair.co.uk for advice.

Service checklist (what we do)

· Remove dirt and debris from motors, vents and circuit boards.

· Inspect wire harnesses and connections.

· Lube all chains, bearings, bushings, rollers, pulleys and pivots.

· Sand build up corrosion from motor flywheels and rollers (where applicable).

· Check condition of motor commutator and brushes (clean motor commutator where applicable).

· Check condition of alternators (where applicable).

· Remove covers, clean and vacuum out interiors.

· Check condition and alignment of all drive belts, chains and cables.

· Align and tighten walking belt.

· Lubricate belt and deck.

· Inspect condition of all bearings and bushings.

· Inspect all other parts for wear and function.

· Tighten loose crank arms, belts and pulleys.

· Check calibration of elevation sensors, re calibrate if necessary.

· Grease drive assemblies and elevation drive systems.

· Check machine function and operation.

· Clean exterior with polish / sealer.

· Run amp / friction tests to test wear on belts and decks.

· Clean and check speed sensors.

· Complete audible inspection of motor, crank and roller bearings.